Home > Products > Suppression > Fire/Suction Hose
Sort By:
Page of 1
NATIONAL 6D HOSE NATIONAL 6D HOSE

POLYESTER DOUBLE JACKET HOSE
Similar in design to 8D hose, 6D is purpose-built for the rigors of industrial firefighting but with lower operating pressures at 300 psi (2070 kPa) maximum. When the pressures are lower and the economics demand consideration, this double jacket, rubber lined hose delivers fail-proof performance with a rugged outer jacket, a smooth, steady flow and extra kink resistance. An added benefit: Most sizes of type 6D are UL listed or FM approved and can be labeled if required. Both brass and aluminum couplings are available.

(800) 615-6789
NATIONAL 6D LDH HOSE NATIONAL 6D LDH HOSE

POLYESTER DOUBLE JACKET HOSE
Similar in design to 8D hose, 6D is purpose-built for the rigors of industrial firefighting but with lower operating pressures at 300 psi (2070 kPa) maximum. When the pressures are lower and the economics demand consideration, this double jacket, rubber lined hose delivers fail-proof performance with a rugged outer jacket, a smooth, steady flow and extra kink resistance. An added benefit: Most sizes of type 6D are UL listed or FM approved and can be labeled if required. Both brass and aluminum couplings are available.

(800) 615-6789
NATIONAL 7F (187 FORESTRY HOSE) NATIONAL 7F (187 FORESTRY HOSE)

POLYESTER SINGLE JACKET FORESTRY HOSE
Strong, portable and lightweight for easy transport, 7F is the dependable, all-synthetic fire hose with a polyurethane lining inside a polyester jacket that meets the USDA Forest Service Specification 5100-187 for Synthetic Lined fire hose. It is ideal for traditional Type 1 specifications. Available in 50′ or 100′ lengths, 7F includes aluminum rocker lug or ¼ turn forestry couplings.

(800) 615-6789
NATIONAL 8D HOSE NATIONAL 8D HOSE

POLYESTER DOUBLE JACKET SUPPLY HOSE
Rugged and quality-built to meet NFPA 1961 Standard requirements, the portable 8D is the essential municipal-grade, double jacket attack handline hose. The lightweight Ethylene Propylene Diene Monomer (EPDM) rubber liner creates consistent flow and is manufactured to a service test pressure of 400 psi to handle the toughest fireground challenges. It boasts a wide temperature range – capable of being used at a mine in Alaska or a construction site in Arizona - which helps earn 8D its reputation as the ultimate multi-purpose hose.

(800) 615-6789
NATIONAL 8F (187 FORESTRY HOSE) NATIONAL 8F (187 FORESTRY HOSE)

POLYESTER SINGLE JACKET FORESTRY HOSE
Revered for its strength and portability, 8F Fire Hose Type 187 is a lightweight, all-synthetic fire hose with a polyurethane lining inside a polyester jacket that meets the USDA Forest Service Specification 5100-187 for Synthetic Lined fire hose. It meets the latest Type ll Specification—and is protected from mildew with no drying required. Adding Dura-Cote™ treatment boosts abrasion, heat and flame resistance while virtually eliminating water pick-up. Available in 50′ or 100′ lengths, 8F includes aluminum rocker lug or quarter turn forestry couplings and meets or exceeds the low weight requirements of the specifications.

(800) 615-6789
NATIONAL 8T HOSE NATIONAL 8T HOSE

LIGHTWEIGHT POLYESTER DOUBLE JACKET HOSE
Versatility meets rugged dependability: 8T is the double jacket municipal-grade fire hose that incorporates a lightweight polyurethane liner for added strength, but with no added bulk to weigh you down. It meets all the requirements of NFPA 1961 Standard, and with optional Dura-Cote™ protective treatment, it is an exceptional value with industry-leading abrasion and puncture resistance, and an extended service life.

(800) 615-6789
NATIONAL DURA-PAK (DP) HOSE NATIONAL DURA-PAK (DP) HOSE

NYLON DOUBLE JACKET ATTACK HOSE
Dura-Pak is the hose that started the industry-wide trend toward sourcing lightweight high-rise attack hose. Originally designed for backpack use, rugged Dura-Pak folds tightly for small spaces, hose beds and high-rise packs, yet it remains kink resistant and resists punctures, abrasion and petrochemicals—reasons why many departments rely on Dura-Pak for frontline attack duties.

(800) 615-6789
NATIONAL N-DURA® (NP) HOSE NATIONAL N-DURA® (NP) HOSE

NYLON DOUBLE JACKET ATTACK HOSE
Confidence. Delivered. N-Dura has an outstanding record of strength, durability and value: 30 years of fireground experience and millions of feet sold. Produced from high-quality raw materials to exacting standards, this rubber-lined, nylon double jacket hose has extinguished fires in all 50 states – from large city departments to small volunteer stations.

(800) 615-6789
NATIONAL TRIPLE DUTY HOSE NATIONAL TRIPLE DUTY HOSE

LARGE DIAMETER NYLON DOUBLE JACKET HOSE
The alternative to bulky rubber LDH hose, Triple Duty is the tough, lightweight double jacket workhorse that flat out performs. Engineered for attack, supply and relay operations, its polyurethane liner is lighter than rubber and its nylon 6.6 outer jacket, treated with exclusive Dura-Cote™ abrasion resistant coating, makes this hose incredibly durable. Weighing substantially less than other LDH hose, Triple Duty is also more portable and packs tighter, requiring less hose bed space.

(800) 615-6789
NORTH AMERICAN BH-800 BOOSTER HOSE NORTH AMERICAN BH-800 BOOSTER HOSE

The BH-800 Booster Hose is a heavy duty, ozone resistant rubber covered booster hose with a braided reinforcement construction. The couplings are polished chrome plated brass, hole type style. Please specify coupling thread NST or SIPT when ordering. Both the hose and couplings are Made in the USA and are fully NFPA 1961 compliant.
Applications include - Booster, Wildland, and Reels
Available in lengths up to 200 feet

(800) 615-6789
NORTH AMERICAN D-BAK 800 FIRE HOSE NORTH AMERICAN D-BAK 800 FIRE HOSE

EPDM Rubber Lining / Nylon 6-6 Double Jacket
D-BAK (Dura Built Anti Kink) hose features exclusive DURA-CORD® advanced air-textured Nylon 6-6 continuous filament warp yarns, resulting in superior toughness, abrasion resistance, cut resistance, tear strength and heat resistance when compared to competitive nylon, spun polyester or filament polyester warp constructions. Unique Ultra-Shield™ high performance polymeric coating seals each and every fiber in the bundle, further improving the abrasion resistance, reducing moisture and chemical absorption, and providing vivid color-coded identification.
Applications include Attack, High Rise, CAFS
Available in 50 foot lengths

(800) 615-6789
NORTH AMERICAN DURA-BUILT 600 LDH FIRE HOSE NORTH AMERICAN DURA-BUILT 600 LDH FIRE HOSE

EPDM Rubber Lining / Nylon 6-6 Jacket
Dura-Built 600 LDH is manufactured with our exclusive DURA-CORD® advanced air-textured Nylon 6-6 continuous filament warp yarns, with a unique Ultra-Shield™ high-performance polyurethane coating, and an EPDM rubber lining. The result is an extremely strong and flexible hose, with exceptional heat, abrasion, chemical and kink resistance. The Dura-Bond™ vulcanized adhesion system creates both a mechanical and chemical bond between the EPDM lining and the inner jacket, eliminates the possibility of delamination as is experienced with competitive adhesive bonded rubber lined constructions.
Applications include - Attack, Supply, Relay and High Volume CAFS
Available in 25, 50 and 100 foot lengths

(800) 615-6789
NORTH AMERICAN DURA-BUILT 800 FIRE HOSE NORTH AMERICAN DURA-BUILT 800 FIRE HOSE

EPDM Rubber Lining / Nylon 6-6 Jacket
Dura-Built 800 is manufactured with our exclusive DURA-CORD® advanced air-textured Nylon 6-6 continuous filament warp yarns, with a unique Ultra-Shield™ high-performance polyurethane coating, and EPDM rubber lining. The result is an extremely strong and flexible hose, with exceptional heat, abrasion, chemical and kink resistance. Both the hose and couplings are Made in the USA and are fully NFPA 1961 compliant.
Applications include - Attack, High Rise and CAFS
Available in 50 or 100 foot lengths

(800) 615-6789
NORTH AMERICAN DURA-FLOW 800 FIRE HOSE NORTH AMERICAN DURA-FLOW 800 FIRE HOSE

Polyurethane (TPU) Lining / Nylon 6-6 Jacket
Dura-Flow 800 is manufactured with our exclusive DURA-CORD® advanced air-textured Nylon 6-6 continuous filament warp yarns, with a unique Ultra-Shield™ high-performance polyurethane coating, and Dura-Thane™ polyurethane inner lining. The result is an extremely strong and flexible hose, with exceptional heat, abrasion, chemical and kink resistance. Both the hose and couplings are Made in the USA and are fully NFPA 1961 compliant.
Applications include: Attack, High Rise, CAFS, and Potable Water
Available in 50 or 100 foot lengths

(800) 615-6789
NORTH AMERICAN HI-FLOW 400 LDH FIRE HOSE NORTH AMERICAN HI-FLOW 400 LDH FIRE HOSE

Nitrile Rubber Through-The-Weave Construction
Hi-Tech 400 LDH fire hose is manufactured with a 100% synthetic reinforcement, totally encapsulated in a Nitrile Rubber compound utilizing a through-the-weave process. A heavy duty rubber hose construction with good heat and chemical resistance. The hose is made in Spain to NAFH specifications, and the couplings are Made in USA. Both the hose and couplings are fully NFPA 1961 compliant.
Applications - Supply and Relay
Available in 25, 50 and 100 foot lengths

(800) 615-6789
NORTH AMERICAN HI-TECH 600 FIRE HOSE NORTH AMERICAN HI-TECH 600 FIRE HOSE

Nitrile Rubber Through-The-Weave Construction
Hi-Tech 600 fire hose is manufactured with a 100% synthetic reinforcement, totally encapsulated in a Nitrile Rubber compound utilizing a through-the-weave process. A medium duty rubber hose construction with good heat and chemical resistance. The hose is made in Spain to NAFH specifications, and the couplings are Made in USA. Both the hose and couplings are fully NFPA 1961 compliant.
Applications - Attack, High Rise and Forestry
Available in 50 and 100 foot lengths

(800) 615-6789
NORTH AMERICAN OUTBACK 600 FIRE HOSE NORTH AMERICAN OUTBACK 600 FIRE HOSE

Polyurethane (TPU) Lining / Polyester Jacket
Outback 600 fire hose is manufactured with Poly-Cord™ ring spun polyester warp yarns which are combined with filament polyester filler yarns, with a High Visibility Yellow Ultra-Shield™ polyurethane coating, and a Dura-Thane polyurethane inner lining. Immune to the effects of mildew and rot, requiring less maintenance after use, and is designed to withstand the rigors of the “Outback”, as well as other wildland fire fighting situations.Both the hose and couplings are fully NFPA 1961 compliant.
Applications - Forestry, Wildland, and CAFS
Available in 50 and 100 foot lengths

(800) 615-6789
NORTH AMERICAN POLY-FLOW 600 LDH FIRE HOSE NORTH AMERICAN POLY-FLOW 600 LDH FIRE HOSE

Polyurethane (TPU) Lining / Polyester Jacket
Poly-Flow 600 LDH fire hose is manufactured with Poly-Cord™ ring spun polyester warp yarns which are combined with filament polyester filler yarns, and is available in either plain / uncoated “natural” white, or with our optional Ultra-Shield™ high-performance polyurethane coating, and a Dura-Thane™ polyurethane inner lining.
Applications - Attack, Supply, Relay, High Volume CAFS, and Potable Water
Available in 25, 50 and 100 foot lengths

(800) 615-6789
NORTH AMERICAN POLY-FLOW 800 FIRE HOSE NORTH AMERICAN POLY-FLOW 800 FIRE HOSE

Polyurethane (TPU) Lining / Polyester Jacket
Poly-Flow 800 fire hose is manufactured with Poly-Cord™ ring spun polyester warp yarns which are combined with filament polyester filler yarns, and is available in either plain / uncoated “natural” white, or with our optional Ultra-Shield™ high-performance polyurethane coating, and a Dura-Thane™ polyurethane inner lining.
Applications - Attack, High Rise and CAFS
Available in 50 and 100 foot lengths

(800) 615-6789
NORTH AMERICAN POLY-TUFF 1200 FIRE HOSE NORTH AMERICAN POLY-TUFF 1200 FIRE HOSE

EPDM Rubber Lining / Polyester Jacket
Poly-Tuff 1200 is a special heavy duty, high pressure 2-1/2" double jacket fire hose designed to supply water to standpipe and sprinkler systems in high rise buildings. The all polyester construction incorporates heavy gauge, higher tensile strength Poly-Cord™ spun polyester warp yarns, combined with heavy denier, high tenacity filament polyester filler yarns in order to achieve the extreme pressure capability required for this application. A unique Hose Lok™ coupling bonding system permanently bonds the special expansion ring aluminum coupling to the heavy duty hose construction, while exceeding the minimum burst pressure requirement. Unique Ultra-Shield™ high-performance polyurethane coating seals each and every fiber in the bundle, and the EPDM rubber lining utilizes the Dura-Bond™ vulcanization adhesion system.
Applications - High Pressure Supply to High Rise Standpipe and Sprinkler Systems, and Attack
Available in 50 foot lengths only

(800) 615-6789
NORTH AMERICAN POLY-TUFF 600 LDH FIRE HOSE NORTH AMERICAN POLY-TUFF 600 LDH FIRE HOSE

EPDM Rubber Lining / Polyester Jacket
Poly-Tuff 600 LDH fire hose is manufactured with Poly-Cord™ ring spun polyester warp yarns which are combined with filament polyester filler yarns, and is available in either plain / uncoated “natural” white, or with our optional Ultra-Shield™ high-performance polyurethane coating, and an EPDM rubber liner utilizing the Dura-Bond™ vulcanization adhesion system.
Applications - Attack, Supply, Relay, and High Volume CAFS
Available in 25, 50 and 100 foot lengths

(800) 615-6789
NORTH AMERICAN POLY-TUFF 800 FIRE HOSE NORTH AMERICAN POLY-TUFF 800 FIRE HOSE

EPDM Rubber Lining / Polyester Jacket
Poly-Tuff 800 fire hose is manufactured with Poly-Cord™ ring spun polyester warp yarns which are combined with filament polyester filler yarns, and is available in either plain / uncoated “natural” white, or with our optional Ultra-Shield™ high-performance polyurethane coating, and an EPDM rubber lining with the Dura-Bond™ vulcanization adhesion system,.
Applications - Attack, CAFS
Available in 50 and 100 foot lengths

(800) 615-6789
NORTH AMERICAN TRI-FLOW 600 LDH FIRE HOSE NORTH AMERICAN TRI-FLOW 600 LDH FIRE HOSE

Polyurethane (TPU) Lining / Nylon 6-6 Jacket
Tri-Flow 600 LDH is manufactured with our exclusive DURA-CORD® advanced air-textured Nylon 6-6 continuous filament warp yarns, with a unique Ultra-Shield™ high-performance polyurethane coating, and Dura-Thane™ polyurethane inner lining. The result is an extremely strong and flexible hose, with exceptional heat, abrasion, chemical and kink resistance. The Friction Fighter System™ in Tri-Flow 600 LDH™ creates an extremely smooth waterway surface, thereby significantly reducing friction loss and improving flow characteristics.
Applications include: Attack, Supply, Relay, High Volume CAFS, and Potable Water
Available in 25, 50 and 100 foot lengths

(800) 615-6789
PONN CONQUEST (FC) HOSE PONN CONQUEST (FC) HOSE

POLYESTER DOUBLE JACKET ATTACK/SUPPLY HOSE
Today’s fires are hotter—so more water is needed at the nozzle to knock them down fast. Conquest rises to the challenge with a patented thru-the-weave extruded polyurethane liner with a smooth surface that delivers maximum water flow. Conquest logs friction loss reductions of more than 50% compared to other hose designs, delivering more water at standard operating pressure.

(800) 615-6789
PONN CONQUEST LDH PONN CONQUEST LDH

POLYESTER DOUBLE JACKET ATTACK/SUPPLY HOSE
Today’s fires are hotter—so more water is needed at the nozzle to knock them down fast. Conquest rises to the challenge with a patented thru-the-weave extruded polyurethane liner with a smooth surface that delivers maximum water flow. Conquest logs friction loss reductions of more than 50% compared to other hose designs, delivering more water at standard operating pressure.

(800) 615-6789
PONN GLADIATOR (FG) HOSE PONN GLADIATOR (FG) HOSE

POLYESTER JACKET WITH EXTRUDED-THROUGH-THE-WEAVE NITRILE TUBE ATTACK HOSE
The newest addition to the Ponn family, the Gladiator is a premier hose which has a polyester outside jacket that encompasses a very durable nitrile-through-the-weave inside liner. Built to last, the rugged hose is constructed with extruded through-the-weave nitrile rubber liner with a durable outer polyester jacket providing incredible strength and long-lasting performance. The Gladiator performs well at high or low pressures, has a smooth and enhanced waterway for better flows and less kinking than other products on the market. Both the nitrile-through-the-weave inner lining and outer jacket are proudly made at our factories in Pennsylvania, USA.

(800) 615-6789
PONN GLADIATOR (FGN) HOSE PONN GLADIATOR (FGN) HOSE

JACKETED THRU-THE-WEAVE NITRILE RUBBER
Ponn Gladiator FGN is our family of exact-ID attack hoses built for low-pressure, high-flow firefighting environments. Built upon the success of our industry leading Gladiator attack hose product, you can count on the Gladiator FGN family to deliver the highest water flows, industry-leading kink resistance, and exceptional durability. Built to last, this rugged hose is constructed with an extruded thru-the-weave nitrile rubber liner with a durable outer polyester jacket providing incredible strength and long-lasting performance. Gladiator FGN products are 100% manufactured, assembled, & tested in Erie County, Pennsylvania, USA – ask our competition where their components are made!

(800) 615-6789
PONN GLADIATOR FIRE MASTER HOSE (FGM) PONN GLADIATOR FIRE MASTER HOSE (FGM)

A PROPRIETARY JACKETED HOSE WITH BEST IN CLASS HEAT RESISTANCE
Fires are burning hotter, and extinguishing the fire faster is the name of the game. But what advances have been made to manufacture a hose that can withstand the actual thermal conditions it will be exposed to on the fireground? Snap-tite Hose is changing the narrative. Fire hoses are often the last line of defense for a firefighter and is another form of PPE for our brave heroes. A hose that can literally stand the heat while performing exceptionally? We made it. Our testing shows our Gladiator FIRE MASTER (FGM) hose withstands conditions similar to that of an actual fire. The Gladiator FM hose is our response to prevent more burn-through tragedies, because your life is worth it.

(800) 615-6789
PONN SUPREME (FS) HOSE PONN SUPREME (FS) HOSE

POLYESTER DOUBLE JACKET ATTACK HOSE
The industry benchmark for durability and quality for over 40 years, Supreme is a traditional double jacket fire hose that remains one of the best values on the market today. High tensile strength ring-spun polyester yarn with a flexible rubber liner and calendered rubber backing keeps the hose supple when empty—and extremely tough when you need it to perform. Hose sizes up to 3″ are designed specifically for use as heavy duty attack hose. Manufactured to a service test pressure rating of 400 psi (2760 kPa), Supreme handles fireground challenges with complete confidence.

(800) 615-6789
PONN TRU-A-TAKâ„¢ (FST) HOSE PONN TRU-A-TAK™ (FST) HOSE

TRUE INSIDE DIAMETER - TACTICAL ANTI-KINK TECHNOLOGY™
TRU-A-TAK™ : TRUe ID – Attack line – Tactical Anti-Kink Technology™

Upgrade your arsenal with Ponn’s TRU-A-TAK™, the leading True Inside Diameter attack line in the industry. Utilizing our Ponn Supreme hose that was originally designed over 40 years ago, this tried and true construction uses no glued-in lining, but incorporates durable polyester jackets providing incredible strength and long-lasting performance. The TRU-A-TAK™ performs extremely well at low pressures, has a extremely smooth waterway for better flows and less kinking than other true ID products on the market. Both the calendared vulcanized EPDM rubber lining and inner and outer jackets are proudly made at our factories in Pennsylvania, USA.

(800) 615-6789