DRAGON FIRE ALPHA X STRUCTURAL FIREFIGHTING GLOVES
The Dragon Fire Alpha X Gloves are durable and flexible firefighting gloves. They are an all-in-one solution that provides resistance to heat, cold, puncture, abrasions, chemicals and bloodborne pathogens. They are constructed with extra protection in the most crucial places - on the knuckles, palms and fingertips. The top layer is crucically wrapped with double Kevlar stitching, and the Kovenex blend thermal liner offers a level of unsurpassed heat blocking. The inner liner features a thermal urethane vapor barrier that has been specifically designed to outperform other gloves in fire service.The new Alpha X structural firefighting glove is certified by SEI to latest NFPA 1971 standard (2013 edition).
Gauntlet Style - Wristlet Style also available by Special Order Only.
DRAGON FIRE BBP RESCUE GLOVES
The Dragon Fire BBP (Blood Borne Pathogen) Rescue gloves offer full protection from the elements at a rescue scene. With protection from flame, cut, or puncture, and an extended cuff with liner retention system, these gloves are perfect for all rescue situations.The BBP Rescue glove has a sewn in flame, cut, puncture, thermal and abrasion resistant liner. Integrated into our glove is our field proven, extreme duty vapor/BBP barrier. Utilizing the same Kovenex fabric as our famed Alpha X glove the BBP Rescue provides a level of thermal and flash protection not found in any other rescue glove. This protection affords the responder additional protection from hazards on the job. The palm is comprised of premium synthetic leather and strategically placed wear pads. The knuckles are protected with a form fitting impact protection pad finished in wear resistant premium synthetic leather. The glove is finished with a double stitched high dexterity shell, high visibility retro-reflective markings, thermal liner, and pathogen barrier. Attention to detail and utilization of our Extreme Bond Rentention Design yields a glove free of liner pull while allowing the responder to remain nimble and highly dexterous. Dragon Fire’s exclusive full tri-layer task specific design incorporates levels of protection not found in any other rescue, extrication or work glove.
DRAGON FIRE FIRST DUE EXTRICATION GLOVES
The Dragon Fire First Due Rescue Extrication gloves have a sewn in flame, cut, puncture, thermal and abrasion resistant liner. Inside is a thinner layer of Kovenex, the same thermal layer we use in our famed Alpha X gloves. This provides a level of flash protection allowing you vital seconds to remove your hands from the dangerous environment. The palm and knuckle areas are constructed using premium synthetic leather and strategically placed wear pads. The glove is finished with a high dexterity outer shell with double stitched extremely flexible diamond profile rubber wear pads. The thermal liner and exterior are stitched together increasing the strength of the seams allowing for extended life of the glove. Dragon Fire’s exclusive task specific design incorporates levels of protection not found in any other rescue, extrication or work glove.
HAIX AIRPOWER R1 STATION BOOTS
For a paramedic, the majority of your shift is spent wearing station gear. Having the right boot will make for happier feet and a happier work life. Not only do you need footwear that will keep you comfortable, but you need to have a pair of boots that will keep you protected from the many safety hazards you can encounter out on a call. HAIX Airpower R1 does double duty by offering all day comfort and all day protection. It's NFPA certified for station and EMS making it an ideal dual purpose boot.
HAIX AIRPOWER R2 STATION BOOTS
A majority of your time as a firefighter or paramedic will be spent wearing station boots. So it only makes sense to invest in the right kind of boot that can be worn in both the firehouse and on emergency calls. With the right boot, any undertaking becomes easier. With the HAIX® Airpower® R2, your feet are not only kept comfortable but also protected from the many potential hazards encountered on the job.
HAIX AIRPOWER XR1 WILDLAND & STATION / EMS BOOTS
Developed with the wildland firefighter in mind, these boots can take you to the fire line and back with the comfort you need when logging long hours in the station. A dual purpose boot that is NFPA certified for wildland firefighting and EMS, you have the convenience of two boots in one. Anatomically constructed and built with a lightweight composite toe, HAIX® Airpower XR1 boots give your feet plenty of room to move around while protecting them from toe impact and compression because there is nothing worse than a protective toe that pinches or restricts your movement.
HAIX FIRE FLASH XTREME STRUCTURAL BOOTS
No matter what the emergency, Fire Flash Xtreme has you covered. NFPA quad-certified, Fire Flash Xtreme is a Structural, Wildland, HAZMAT, USAR boot. Fire Flash Xtreme is a great alternative for those hard to fit guys who have trouble stepping into pull on bunker boots. These boots can accommodate wider calves and/or ankles with its adjustable built in lacing system. With the easy run lace/zip system, you can be assured that you can step quickly in and out, especially with the added pull tab at the back. Have a prior ankle of foot injury that needs extra support? Fire Flash is the perfect choice since you can adjust each boot individually for a custom fit; cinch lacing tighter for additional support. With the HAIX® Lacing System you can adjust your boots easily and quickly - similar to a zipper boot with the fit of a lace up type of footwear. Flex zone construction around the tongue ensures you will still have the flexibility to perform the job at hand.
HAIX FIRE HERO XTREME STRUCTURAL BOOTS
The nature of your job as a firefighter can entail unforeseen physical challenges, from climbing multiple flights of stairs in full turnout gear, dragging a victim to safety, or dragging heavy hose. You need gear that will handle any situation, providing much needed protection, but also giving you the support and agility you need to safely accomplish the task at hand. The HAIX® Fire Hero Xtreme, our most popular firefighting boot, will do that and more.
HAIX FIRE HUNTER USA STRUCTURAL BOOTS
It’s time to ditch those clunky rubber boots and step into a pair of leathers. Fire Hunter USA is the perfect choice for making that transition from rubber to leather since it won’t take a huge chunk out of your paycheck.
HAIX FIRE HUNTER XTREME STRUCTURAL BOOTS
As a firefighter, you see a lot of heat. In fact, that is what you battle every day, all day when you go into the scene of a fire. You want your work gear to be strong and sturdy, yet comfortable. Finally, there is a boot which delivers everything you expect in fire boot performance and comfort. Certified by UL to NFPA for structural firefighting, the Fire Hunter Xtreme is the boot for you.
CAIRNS 1010 TRADITIONAL HELMET
The MSA Cairns® 1010 traditional fire helmet has the perfect combination of durability and performance desired by firefighters. Constructed from through-color Duraglas™ composite material, this high-performance, luster finish design resists cracking and chipping. Stocked in Black, White and Red, the 1010 is among our most popular styles of MSA Cairns fire helmet for structural and proximity firefighting.
In Stock - Helmet Front sold separately.
CAIRNS 1044 DEFENDER HELMET
The MSA Cairns® 1044 traditional fire helmet has the perfect combination of durability and performance desired by firefighters. Constructed from through-color Duraglas™ composite material, this high-performance matte finish design resists cracking and chipping. The 1044 is one of our most popular styles of MSA Cairns fire helmet. The Defender® Visor for Cairns® 1044 traditional fire helmets offers eye protection from dust, dirt, and grit. The Defender Visor stays clean inside the helmet until eye protection is needed during overhaul and non-IDLH search-and-recovery. Sleek and attractive construction allows fast, easy raising and lowering of the visor even with gloved hands.
In Stock - Helmet Front Sold Separately.
CAIRNS 1044 TRADITIONAL HELMET
The MSA Cairns® 1044 traditional fire helmet has the perfect combination of durability and performance desired by firefighters. Constructed from through-color Duraglas™ composite material, this high-performance matte finish design resists cracking and chipping. The 1044 is one of our most popular styles of MSA Cairns fire helmet.
CAIRNS 360R-13 RESCUE HELMET
Lightweight Cairns 360R-13 offers excellent protection when seconds
count. This low-profile thermoplastic helmet is specifically designed
for rescue usage. Complies with Standard on Protective Ensembles for
Technical Rescue Incidents (NFPA 1951-2013).
CAIRNS 360S STRUCTURAL HELMET
The multi-incident Cairns® 360S Structural fire helmet is of the lightest modern-style helmets available in the MSA Cairns line, making it perfect for confined space and EMS work alike.
CAIRNS 660C METRO HELMET
The MSA Cairns® 660C Metro™ modern fire helmet is tough enough for structural firefighting, light enough for wildlands, and small enough for EMS and confined space applications. Available with the popular retractable Defender Visor, which can easily be raised or lowered with a gloved hand.
CAIRNS 664 INVADER HELMET
The cost-efficient Cairns Invader 664 Composite Fire Helmet offers solid protection and comfort. The lightest structural fire helmet in the Cairns line, the Invader 664 is tough enough for structural firefighting, light enough for wildlands, and small enough for EMS and confined space applications. Available with the popular retractable Defender Visor, which can easily be raised or lowered with a gloved hand.
CAIRNS 880 TRADITIONAL HELMET
The Cairns® 880 traditional fire helmet offers a tough, high-temperature thermoplastic shell resistant to chipping and cracking, and a low-ride helmet design creates a low-profile for superior clearance and maneuverability.
CAIRNS LEATHER PASSPORT STYLE FRONT #49 - 6"
Add some striking looks to your durable Cairns helmet with the Cairns #49 - 6" Leather Passport Style Front. Leather fronts add a touch of personalization to the company's fire helmets.
CAIRNS LEATHER HELMET FRONTS
Add some striking looks to your durable Cairns helmet with the Cairns Fire Helmet Fronts. Leather and gold leaf fronts add a touch of personalization to the company's fire helmets. The lettering and panels are available in Scotchlite™, and literally millions of possible configurations are available. Options include Standard Fronts, Passport Fronts, and Printed Gold Leaf Fronts and Hand Painted Gold Leaf Fronts for the 4", 6", and 8" sizes.
CAIRNS N5A NEW YORKER LEATHER HELMET
The Cairns® N5A New Yorker™ leather helmet is handcrafted and meets current OSHA requirements. Offers the high quality and appearance that generations of firefighters have trusted since 1836. Each Houston leather helmet is hand-crafted, shaped, stitched, and trimmed to last for years with minimum maintenance.
LIONExpress FUSION COAT
Get the turnout you need, when you need it. The LIONExpress™ turnout coat has a bi-swing back for outstanding forward mobility and is designed to provide optimal moisture management and thermal protection. Available in gold Fusion®.
LIONExpress FUSION PANT
Get the turnout you need, when you need it. The LIONExpress™ turnout pant is designed to provide optimal moisture management and thermal protection. These low-rise pants are contoured for superior comfort and fit with knee cushioning that allows for better mobility. Available in gold Fusion®.
LION V-FORCE CUSTOM TURNOUT GEAR
The Best Technology in Firefighter Turnouts. V-Force raises the bar for firefighter protective clothing by employing LION's innovative V-Fit™ Design. V-Fit takes the best technology from combat and professional sports clothing and applies it to turnout gear. The result is the optimum balance of comfort, mobility and protection.
5 ALARM SPEC LION V-FORCE TURNOUT GEAR
ATHLETIC-FIT GEAR THAT TAKES IT TO THE MAX!
LION V-Force takes the best technology from combat and professional sports clothing and applies it to turnout gear. The result is the optimum balance of mobility and protection. Additionally, LION’s exclusive V-Fit™ design makes V-Force turnouts more comfortable than common firefighter gear. The NFPA 1971 (2013 edition)-compliant PBI Max™ outer shell offers firefighters the best combination of break open and thermal protection, the strongest outer shell fabric in the world and the most flexible and comfortable outer shell fabric the fire service has ever seen.
LION FOUR-WAY NON-STRETCH SUSPENDERS
Lion Four-Way Non-Stretch suspenders are traditional red in color. Complete with water-resistant metal clips for easy connection and removal.
LION EZ H-BACK QUICK-ADJUST NON-STRETCH SUSPENDERS - YELLOW TRIM
Lion EZ H-Back Quick-Adjust Non-Stretch suspenders are black with yellow trim and navy shoulder padding. A quick tug of the plastic loops delivers perfect adjustment each time. Makes donning quick and easy. Rectangular metal loops. Requires snap tabs on pants.
LION EZ H-BACK QUICK-ADJUST NON-STRETCH SUSPENDERS
Lion EZ H-Back Quick-Adjust Non-Stretch suspenders are black with navy shoulder padding. A quick tug of the plastic loops delivers perfect adjustment each time. Makes donning quick and easy. Metal loop fasteners.
LION V-BACK QUICK-ADJUST STRETCH PADDED SUSPENDERS
Lion V-Back Quick-Adjust Stretch padded suspenders are traditional red in color with black padding. Quick tug of plastic loops delivers perfect adjustment each time. Connecting straps on belted pants thread through loop and are secured with snap.
Square Metal Loops - for pants with Sewn In Attachment Loops