Home > Products > Extrication
Choose a sub category:
eDRAULIC eDRAULIC Watertight 10,000 PSI
5,000 PSI Cutters Spreaders
Combination Tools Rams Power Units
Specialty Tools Accessories Stabilization
Vetter/Airbags Glass Removal
Sort By:
Page of 2
HURST EXL RESCUE BATTERY HURST EXL RESCUE BATTERY

More power equals more rescues.
The “EXL” delivers 5 Ah capacity. That’s right, count them, 1… 2… 3… 4… 5 Ah. That means our eDRAULIC tools deliver day-saving power for an entire one-hour rescue operation. Plus, they easily change out in seconds and can be used with all eDRAULIC tools, including the first eDRAULIC generation.

(800) 615-6789
HURST JL 635 SE POWER UNIT HURST JL 635 SE POWER UNIT

The power to be your best.
The JL 635 SE is small, but it is a mighty power machine. Compact, turbo power with a slightly larger reservoir than the ML 630 make this simple unit a must-have for rescue personnel.

(800) 615-6789
HURST JL 635 SG POWER UNIT HURST JL 635 SG POWER UNIT

The power to be your best.
The JL 635 SG is small, but it is a mighty power machine. Compact, turbo power with a slightly larger reservoir than the ML 630 make this simple unit a must-have for rescue personnel.

(800) 615-6789
HURST JL-500 CUTTER HURST JL-500 CUTTER

The JL-500 is a hot knife, and steel is the butter.
The new JL-500 cutter has been engineered with forged shock-resistant blades to cut through today’s stronger, thicker steel with ease. Uniquely shaped to generate more power at near full-open position, this new cutter offers more power in the relevant work area. Steel never had a chance.

(800) 615-6789
HURST JL-8 JACK RABBIT TOOL HURST JL-8 JACK RABBIT TOOL

A hero of heroes.
Rescuers turn to the tools that perform. That’s why they turn to the JL-8 Jack Rabbit Tool time and again. Weighing in at 16 pounds, it has a spreading distance of 9 inches for larger, more challenging forcible-entry applications. And with a spreading force of 8,000 pounds, nothing is much of a challenge.

(800) 615-6789
HURST JL-QE POWER UNIT HURST JL-QE POWER UNIT

Power four tools simultaneously or two tools in turbo.
With HURST’s JL-QE electric motor power unit, rescue professionals can operate four tools simultaneously or two tools in turbo mode, with increased flow rate for faster tool operation.

(800) 615-6789
HURST MINI CUTTER HURST MINI CUTTER

Johnny-on-the-spot in any spot.
With our Mini Cutter, confined spaces are about to be a lot less confined. With a cutting force of up to 17,000 lbs. and a cutter opening of 1.5 in. for precise operation in confined spaces, this 8-lb. tool is a beast on the scene. Lightweight and extremely portable, Hurst’s line of specialty tools can be used with either a manual pump or a battery power unit. Sold by the piece or as a set, the specialty tools are stand-alone rescue systems.

(800) 615-6789
HURST MINI-LITE HAND PUMP HURST MINI-LITE HAND PUMP

Powered by elbow grease.
Our Mini-Lite Hand Pump is the quick answer to any problem. Hand-operated, lightweight (9 pounds) and compatible with all HURST Mini-Lite tools and specialty tools, it’s a hard worker, but extremely easy to store.

(800) 615-6789
HURST ML 630 SI POWER UNIT HURST ML 630 SI POWER UNIT

Setting the new standard in power units.
The new ML 630 SI power unit offers the best of the best. Lightweight, compact, and turbo power make this power unit a must have for rescue personnel.

(800) 615-6789
HURST MOC COMBI TOOL HURST MOC COMBI TOOL

Two tools. One very important job.
If you need a multi-functional tool that will cut and spread with maximum force for maximum results, the MOC Combi is the tool for you. Read these stats and you’ll agree: It features up to 57,998lbs. of spreading force, up to 19,108 lbs. of pulling force and an incredible 120,268 lbs. of cutting force. It is a force to be reckoned with on any job.

(800) 615-6789
HURST P 630 SG POWER UNIT HURST P 630 SG POWER UNIT

Setting the standard in power units.
Lightweight, compact and turbo power make this power unit a must-have for rescue personnel.

(800) 615-6789
HURST P 635 SE POWER UNIT HURST P 635 SE POWER UNIT

Where heroes get their power.
The P 635SE Power Unit is a lean, mean power machine. Turbo power that is easier to handle than previous models. This compact machine brings all the power rescue personnel will need.

(800) 615-6789
HURST P 635 SG POWER UNIT HURST P 635 SG POWER UNIT

Where heroes get their power.
The P 635SG Power Unit is a lean, mean power machine. Turbo power that is easier to handle than previous models. This compact machine brings all the power rescue personnel will need.

(800) 615-6789
HURST P 650 4E POWER UNIT HURST P 650 4E POWER UNIT

Power four tools simultaneously or two tools in turbo.
With HURST's P 650 4E electric motor power unit, rescue professionals can operate four tools simultaneously or two tools in turbo mode, with increased flow rate for faster tool operation.

(800) 615-6789
HURST R 420 RAM HURST R 420 RAM

A potent combination of lightweight and powerful.
This two-stage telescoping ram provides nearly double the stroke length and power of standard rams while requiring less storage space. Plus, it has claws on the top and base for a firm grip and powerful stroke from nearly any surface.

(800) 615-6789
HURST R 421E2 RAM HURST R 421E2 RAM

Extends up to 53".
The R 421E2 is the industry’s first battery-powered telescopic rescue ram. And while it is extremely compact, it offers enough strength to pack a powerful wallop. The newly designed, sharp claws at both ends can be rotated 360º, enabling you to apply the ram effectively in almost any precarious situation.

(800) 615-6789
HURST R 422 RAM HURST R 422 RAM

Powers past the limitations of traditional rams.
It would take two traditional rams to do the work this can. This solid steel, two-stage ram can lift up 30 U.S. tons in the first stage and 14 U.S. tons in the second stage. And it has a dual pilot check valve that will sustain necessary load requirements even if the hydraulic flow is interrupted. Powerful stuff that can make quick work of dashboards and steering wheel columns.

(800) 615-6789
HURST R 422E2 RAM HURST R 422E2 RAM

Everyone needs a little more ram.
With an extended length of 59.1 inches, this tool can give you room to spare. It has sharp claws at both ends that rotate 360 degrees, so you can use it in even the trickiest situations.

(800) 615-6789
HURST R 424 RAM HURST R 424 RAM

The complete ram for the complete rescue.
It has it all — power, stroke and a compact size. Made from solid steel, the R 424 provides high tensile strength and eliminates side-load distortion. And its two-stage telescoping reaches the lifting height of two standard rams. When you’re saving lives, you don’t want standard.

(800) 615-6789
HURST R 430 RAM HURST R 430 RAM

The The world’s first triple-stage ram.
Capable of carrying out the heaviest rescue operations, this ram is a first of its kind. Because of its three stages, it delivers a long working range that considerably reduces extrication time. And that saves lives. It has a push capacity of 30 U.S. tons in the first stage and 14 U.S. tons in the second. Plus, heat-treated claws on the top and base provide grip on flat and angled surfaces. This tool lives up to the “ram” name.

(800) 615-6789
HURST R 521EWXT RAM HURST R 521EWXT RAM

Pack an underwater punch.
The first ram of its kind. What it does above water is incredible. What it does underwater is downright absurd. This ram is the first of its kind. It allows you to create wide rescue openings while submerged in fresh water without being encumbered by any hoses or power units. The sharp claw at both ends enables you to apply it effectively in almost any precarious situation — especially underwater.

(800) 615-6789
HURST RABBIT TOOL HURST RABBIT TOOL

This rabbit is a workhorse.
8,000 pounds of spreading power. A spreading distance of 4 inches. Weighs only 11 pounds. The stats are impressive. But the Rabbit Tool impresses even more in person. Lightweight and extremely portable, HURST’s line of specialty tools can be used with either a manual pump or a battery-powered unit.

(800) 615-6789
HURST S 120 CUTTER HURST S 120 CUTTER

Cuts through obstructions in confined spaces.
Don’t let confined spaces get in the way of getting the job done. The handy S 120 has the power to cut steering wheels, pedals and other metal constructions in tight quarters. And its compact design makes this mighty mite easy to store.

(800) 615-6789
HURST S 377 CUTTER HURST S 377 CUTTER

Open wide and take a big bite.
This lightweight cutter has an extra-large blade opening so it can tackle just about anything. It gives you a huge edge in extrications. Add the star-grip control and you’ll be ready to save the day wherever you are.

(800) 615-6789
HURST S 377E2 CUTTER HURST S 377E2 CUTTER

This cutter is like a great white on steroids.
The large blade opening gives this cutter quite a bite. The S 377E2 conveniently rips through metal and gives you a huge edge in extrications. Move over competition, or you’ll get hurt.

(800) 615-6789
HURST S 788 CUTTER HURST S 788 CUTTER

This wide mouth is hungry for everything.
Nothing can stand in its way. Its newly designed large opening even enhances its damage with 67% more cutting force in the relevant work area. Make sure you have this hungry hero on your rescue team.

(800) 615-6789
HURST S 788E2 CUTTER HURST S 788E2 CUTTER

This cutter can get its jaws around just about anything.
With a 7.87-inch opening, it can cut through current vehicle construction as well as future construction with ease. The perfect hero for any rescue team.

(800) 615-6789
HURST S 788EWXT CUTTER HURST S 788EWXT CUTTER

Meet the only battery-powered underwater cutting tool. No wonder it’s a Jaws.
This rescue tool is the first of its kind. It’s a cutter that allows you to operate submerged in fresh water and unencumbered by any hoses or power units. And despite this unique skill, it’s still one of the fastest, most powerful cutters in the business.

(800) 615-6789
HURST S 799 CUTTER HURST S 799 CUTTER

The cutter with a big mouth.
This tool loves getting its cutting blades around today’s bigger, stronger steel with an 8.03-inch blade opening. It’ll complete most B-post cuts with one bite. It also reduces tool swing challenges by cutting A and B posts from its easy-to-handle perpendicular angle. This cutter is so strong with a big bite that it gets an NFPA rating of 9 in all categories, making it the best in its class.

(800) 615-6789
HURST S 799E2 CUTTER HURST S 799E2 CUTTER

The best rescue cutter ever designed.
This eDRAULIC® cutter can’t wait to get its blades around today’s bigger, stronger, meaner steel with an 8.03-inch opening. It has no problems with modern B posts and tool swing challenges aren’t a problem when cutting A and B posts either — just cut them easily at a comfortable perpendicular angle. This cutter is so strong it gets an NFPA rating of 9 in all categories, making it the best in class.

(800) 615-6789