 |
 |
 |
|
Fire rescue blades trusted by firefighters for forcible entry, extrication, USAR, and RIT. Cuts almost anything. Made of solid steel, so it won't shatter or lose segments. Cuts: Metal braces, hardened locks and shackles, hockey puck locks, security gates, chain link fence, car doors, galvanized steel guard rails, bulletproof glass, wood, drywall, 2x4s, plywood, stucco, concrete, rebar, and more.
Forcible Entry Training with the Fire Rescue Safety Blade at Brotherhood Instructors, LLC
More Forcible Entry Training at Brotherhood Instructors, LLC with the Fire Rescue Safety Blade
- Materials - Metal braces; hardened locks and shackles; hockey puck locks; security gates; chain-link fence; car doors; bulletproof glass; wood; drywall; 2x4s; plywood; stucco; galvanized steel; ductile, cast, angle and black iron; high-nickel Hastelloy "super alloys"; schedule 40 and 80 steel pipe; PVC; HDPE; C-900; plastic pipe; concrete; rebar; block; brick; stone; and asphalt.
- Wet/Dry - Dry cutting, can be used for wet cutting
- Air Flow Technology - Cooling technology developed by Desert Diamond Industries that allows our blades to cut on red-hot steel without warping or wobbling
- Electroplating - Electroplated swirl design prevents binding and pinching
- Segment Weld - No weld. Blade is solid steel. Eliminating welds eliminates segment loss and increases safety.
- Segment Height - 8mm vacuum-brazed diamond cutting edge
- Diamond Percentage - 85% on the cutting edge
- Warranty - Life Time Operator Error Warranty against breakage, warping and wobbling, as well as any damage to the blade caused by the operator (i.e. dropping the saw, bending or pinching blade in cut, damage in storage, etc.)
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Keeps Saw Operators Safe - Fire Rescue Safety Blades are made of solid steel (up to 14") to eliminate injuries and fatalities from shattering blades and segment loss
- Reduces Sparks - Fire Rescue Safety Blades generate 90% less sparks than abrasives during cutting
- Reduces Binding During Cuts - Fire Rescue Safety Blades' electroplated swirl design helps prevent binding, because you can't waste time wrenching a blade out of a cut during an emergency
- Prevents Warping and Wobbling - Fire Rescue Safety Blades' Air Flow Technology helps dissipate heat during continuous use
- Reduces Health Insurance Costs and Lost Time - Fire Rescue Safety Blades won't generate hazardous dust during cutting, unlike abrasive blades
- Outlasts Abrasive Blades - You'll go through 150 good quality abrasive blades - costing $4 to $10 and totaling $600 to $1,500 - before you'll wear down just one of our Fire Rescue Safety Blades
- Ecologically Friendly - Fire Rescue Safety Blades are 100% recyclable steel, unlike abrasives, which are 100% waste
- Life Time Operator Error Warranty - Fire Rescue Safety Blades come with the most comprehensive warranty in the industry and are warrantied for life against any and all damages
|
|
|
|
|
|
|