SCBA FLOW TESTING
5 Alarm offers SCBA flow testing. Our MSA factory trained service technician will inspect all equipment, flow test, and make needed adjustments to assure proper performance. All flow tests and adjustments are documented and provided to you with the ProCheck3 printout during service. Repairs will be completed at the time of service. The service includes visual inspection of the regulator, face piece, and air cylinder, as well as the flow test, audi-larm test, check of the URC coupling & connection.
PORTACOUNT FIT TESTING Will coordinate with your employee schedule to perform on site Quantitative Fit Testing as required by OSHA. Our certified and calibrated machine will provide individual test results for your employee records. Or choose to rent the machine and we will either ship the unit to you or drop the unit off at your location. Prefer to fit test during annual flow testing.
GAS MONITOR CALIBRATION & REPAIR Calibrations performed by certified MSA tech, include visual inspections of buttons, casing. Start up run through cycle, confirm ambient air readings, perform fresh air set-up/bump test, zero out. Calibrate to specified gas. Verify pass/fail.
TIC REPAIR 5 Alarm also offers MSA TIC Repair. Please contact our Service Manager, Rob Thompson, for more information at (262) 337-9123 or email us at firstname.lastname@example.org. Please note that a Minimum Service Inspection fee may apply. Click on our Return Authorization Form button for more information.